Inferno MP10 TKI3 1/8 .21 Engine Powered Buggy

The 1/8 scale GP Buggy is one of the most popular R/C car racing categories in the world. As the benchmark for competitiveness, the Inferno Series has led development through continued innovation, encouraging efforts by other manufacturers to improve their machines year by year. Based on the existing MP10 TKI2, the latest TKI3 Inferno model incorporates components and design elements that were developed for the 2022 IFMAR (International Model Car Federation) World Championships. By changing the body design, the TKI3 can adapt to a wide range of track layouts, from technical circuits with tight corners to high-speed courses typically found in Europe. Adjustable wing height also expands the range of aerodynamic settings. Thicker gauge wire in new suspension springs was introduced for the World Championships for tighter cornering control. In addition, a review of the drive system incorporated a smaller center differential with revised gear ratio and a lighter spur gear plus 3-piece clutch to improve throttle response. The MP10 TKI3 is more capable and more adaptable to different types of course layouts, not only for high-level competition, but also just for the fun of driving very fast. Whether you are competing at the highest level or simply enjoying an R/C car in its purest form, the TKI3 exceeds all expectations.

NOTE: This item is sold as a kit. Requires assembly, assembly tools, and additional components to complete.

---

Includes:

• Unassembled chassis kit
• Special wheels
• Wing
• Special clear body
• Window mask seal
• Logo decals
• Fuel tube
• Linkage parts
• Clutch parts
• Air cleaner
• Ring gear grease
• 1.5, 2.0, 2.5mm Hexagonal wrench
• Cross wrench
• Wheel wrench

---

Required to Complete:

• 2-channel 2-servo R/C system for cars
• Compatible batteries for R/C system
• 21 engine
• Muffler
• Tires w/foam inserts for 1/8 buggy
• Starter box
• Plug heater
• Fuel
• Fuel bottle
• Oil for air cleaner
• Shock oil
• Diff oil
• Paint for car body
• Tools

---

Features:

• The Inferno MP10 continues on its evolutionary path, boasting achievements in major races including the World Championships.
• Using the MP10 TKI2 as a base, newly developed components have been tested in the heat of battle at the World Championships. Incorporating the latest development trends from around the world, the TKI3 demonstrates exceptional performance on Japanese and international circuits.
• Shaft-type 4WD delivers higher speed with superior reliability. Reduction ratio can be changed for compatibility with high-speed circuits.
• Optimal front-to-rear weight balance produces superior maneuverability by positioning heavier components towards the front of the chassis.
• Newly designed body with advanced aerodynamic performance increases cornering speeds and can be used interchangeably with the existing TKI2 body.
• Equipped with wing spacers for adjusting wing height to change handling characteristics for optimal tuning.
• Downsized center differential improves throttle response.
• Newly developed springs for long diaphragm-type front and rear oil shocks deliver superior suspension stability.
• Unassembled kit includes wheels, body and wing.
• Hard-type wheels deliver improved stability on high-speed circuits and over rough surface gap
• Weight reduction has been achieved